Law of multiple proportions

From Wikipedia, the free encyclopedia

In chemistry, the law of multiple proportions is one of the most basic laws of stoichiometry. It is related to the law of definite proportions. It is sometimes called Dalton's Law after its discoverer, the English chemist John Dalton, though this usually refers to his law of partial pressures.

One statement of the law is:

If two elements form more than one compound between them, then the ratios of the masses of the second element which combine with a fixed mass of the first element will be ratios of small whole numbers.

Another way to say this is:

A law proposed by Dalton which states that when elements combine, they do so in the ratio of small whole numbers. For example carbon and oxygen react to form CO or CO2, but not CO1.8.

However, it only applies to compounds sharing the same type of chemical bonding - for example, the law would not work properly for carbon monoxide (CO) and carbon dioxide (CO₂) because carbon dioxide consists of some double bonding.

John Dalton first expressed this observation in 1803. A few years previously, the French chemist Joseph Proust had proposed the law of definite proportions, which expressed that the elements combined to form compounds in certain well-defined proportions, rather than mixing in just any proportion. Careful study of the actual numerical values of these proportions led Dalton to propose his law of multiple proportions. This was an important step toward the atomic theory that he would propose later that year, and it laid the basis for chemical formulas for compounds.

The law of multiple proportions is best demonstrated using simple compounds. For example, if one tried to demonstrate it using the hydrocarbons decane (chemical formula C₁₀H₂₂) and undecane (C₁₁H₂₄), one would find that 100 grams of carbon could react with 18.46 grams of hydrogen to produce decane or with 18.31 grams of hydrogen to produce undecane, for a ratio of hydrogen masses of 121:120, which is hardly a ratio of "small" whole numbers.

[edit] The Four Laws

[edit] The Atomic Molecular Theory

There are over 18 million known substances in our world. We will begin by assuming that all materials are made from elements, materials which cannot be decomposed into simpler substances. We will assume that we have identified all of these elements, and that there a very small number of them. All other pure substances, which we call compounds, are made up from these elements and can be decomposed into these elements. For example, metallic iron and gaseous oxygen are both elements and cannot be reduced into simpler substances, but iron rust, or ferrous oxide, is a compound which can be reduced to elemental iron and oxygen. The elements are not transmutable: one element cannot be converted into another. Finally, we will assume that we have demonstrated the Law of Conservation of Mass.

[edit] Law 1: Law of Conservation of Mass

The total mass of all products of a chemical reaction is equal to the total mass of all reactants of that reaction. These statements are summaries of many observations, which required a tremendous amount of experimentation to achieve and even more creative thinking to systematize as we have written them here. By making these assumptions, we can proceed directly with the experiments which led to the development of the atomic-molecular theory. Goals The statements above, though correct, are actually more vague than they might first appear. For example, exactly what do we mean when we say that all materials are made from elements? Why is it that the elements cannot be decomposed? What does it mean to combine elements into a compound? We want to understand more about the nature of elements and compounds so we can describe the processes by which elements combine to form compounds, by which compounds are decomposed into elements, and by which compounds are converted from one to another during chemical reactions. One possibility for answering these questions is to assume that a compound is formed when indestructible elements are simply mixed together, as for example, if we imagine stirring together a mixture of sugar and sand. Neither the sand nor the sugar is decomposed in the process. And the mixture can be decomposed back into the original components. In this case, though, the resultant mixture exhibits the properties of both components: for example, the mixture would taste sweet, owing to the sugar component, but gritty, characteristic of the sand component. In contrast, the compound we call iron rust bears little resemblance to elemental iron: iron rust does not exhibit elemental iron's color, density, hardness, magnetism, etc. Since the properties of the elements are not maintained by the compound, then the compound must not be a simple mixture of the elements.

We could, of course, jump directly to the answers to these questions by stating that the elements themselves are composed of atoms: indivisible, identical particles distinctive of that element. Then a compound is formed by combining the atoms of the composite elements. Certainly, the Law of Conservation of Mass would be easily explained by the existence of immutable atoms of fixed mass. However, if we do decide to jump to conclusions and assume the existence of atoms without further evidence (as did the leading chemists of the seventeenth and eighteenth centuries), it does not lead us anywhere. What happens to iron when, after prolonged heating in air, it converts to iron rust? Why is it that the resultant combination of iron and air does not maintain the properties of either, as we would expect if the atoms of each are mixed together? An atomic view of nature would not yet provide any understanding of how the air and the iron have interacted or combined to form the new compound, and we can't make any predictions about how much iron will produce how much iron rust. There is no basis for making any statements about the properties of these atoms. We need further observations.

[edit] Observation 1: Mass relationships during chemical reactions

The Law of Conservation of Mass, by itself alone, does not require an atomic view of the elements. Mass could be conserved even if matter were not atomic. The importance of the Law of Conservation of Mass is that it reveals that we can usefully measure the masses of the elements which are contained in a fixed mass of a compound. As an example, we can decompose copper carbonate into its constituent elements, copper, oxygen, and carbon, weighing each and taking the ratios of these masses. The result is that every sample of copper carbonate is 51.5% copper, 38.8% oxygen, and 9.7% carbon. Stated differently, the masses of copper, oxygen, and carbon are in the ratio of 5.3 : 4 : 1, for every measurement of every sample of copper carbonate. Similarly, lead sulfide is 86.7% lead and 13.3% sulfur, so that the mass ratio for lead to sulfur in lead sulfide is always 6.5 : 1. Every sample of copper carbonate and every sample of lead sulfide will produce these elemental proportions, regardless of how much material we decompose or where the material came from. These results are examples of a general principle known as the Law of Definite Proportions.

[edit] Law 2: Law of Definite Proportions

When two or more elements combine to form a compound, their masses in that compound are in a fixed and definite ratio. This data helps justify an atomic view of matter. We can simply argue that, for example, lead sulfide is formed by taking one lead atom and combining it with one sulfur atom. If this were true, then we also must conclude that the ratio of the mass of a lead atom to that of a sulfur atom is the same as the 6.5 : 1 lead to sulfur mass ratio we found for the bulk lead sulfide. This atomic explanation looks like the definitive answer to the question of what it means to combine two elements to make a compound, and it should even permit prediction of what quantity of lead sulfide will be produced by a given amount of lead. For example, 6.5g of lead will produce exactly 7.5g of lead sulfide, 50g of lead will produce 57.7g of lead sulfide, etc. There is a problem, however. We can illustrate with three compounds formed from hydrogen, oxygen, and nitrogen. The three mass proportion measurements are given in Table 1. First we examine nitric oxide, to find that the mass proportion is 8 : 7 oxygen to nitrogen. If this is one nitrogen atom combined with one oxygen atom, we would expect that the mass of an oxygen atom is 8/7=1.14 times that of a nitrogen atom.

Second we examine ammonia, which is a combination of nitrogen and hydrogen with the mass proportion of 7 : 1.5 nitrogen to hydrogen. If this is one nitrogen combined with one hydrogen, we would expect that a nitrogen atom mass is 4.67 times that of a hydrogen atom mass. These two expectations predict a relationship between the mass of an oxygen atom and the mass of a hydrogen atom. If the mass of an oxygen atom is 1.14 times the mass of a nitrogen atom and if the mass of a nitrogen atom is 4.67 times the mass of a hydrogen atom, then we must conclude that an oxygen atom has a mass which is 1.14 × 4.67 = 5.34 times that of a hydrogen atom. But there is a problem with this calculation. The third line of Table 1 shows that the compound formed from hydrogen and oxygen is water, which is found to have mass proportion 8:1 oxygen to hydrogen.

Our expectation should then be that an oxygen atom mass is 8.0 times a hydrogen atom mass. Thus the three measurements in Table 1 appear to lead to contradictory expectations of atomic mass ratios. How are we to reconcile these results? Mass Relationships for Hydrogen, Nitrogen, Oxygen Compounds Compound Total Mass Mass of Hydrogen Mass of Nitrogen Mass of Oxygen "Expected" Relative Atomic Mass of Hydrogen "Expected" Relative Atomic Mass of Nitrogen "Expected" Relative Atomic Mass of Oxygen Nitric Oxide 15.0 g - 7.0 g 8.0 g - 7.0 8.0 Ammonia 8.5 g 1.5 g 7.0 g - 1.5 7.0 - Water 9.0 g 1.0 g - 8.0 g 1.0 - 8.0 One possibility is that we were mistaken in assuming that there are atoms of the elements which combine to form the different compounds. If so, then we would not be surprised to see variations in relative masses of materials which combine. Another possibility is that we have erred in our reasoning. Looking back, we see that we have to assume how many atoms of each type are contained in each compound to find the relative masses of the atoms. In each of the above examples, we assumed the ratio of atoms to be 1:1 in each compound. If there are atoms of the elements, then this assumption must be wrong, since it gives relative atomic masses which differ from compound to compound. How could we find the correct atomic ratios? It would help if we knew the ratio of the atomic masses: for example, if we knew that the oxygen to hydrogen mass ratio were 8:1, then we could conclude that the atomic ratio in water would be 1 oxygen and 1 hydrogen. Our reasoning seems to circular: to know the atomic masses, we must know the formula of the compound (the numbers of atoms of each type), but to know the formula we must know the masses. Which of these possibilities is correct? Without further observations, we cannot say for certain whether matter is composed of atoms or not.

[edit] Observation 2: Multiple Mass Ratios

Significant insight into the above problem is found by studying different compounds formed from the same elements. For example, there are actually three oxides of nitrogen, that is, compounds composed only of nitrogen and oxygen. For now, we will call them oxide A, oxide B, and oxide C. Oxide A has oxygen to nitrogen mass ratio 2.28 : 1. Oxide B has oxygen to nitrogen mass ratio 1.14 : 1, and oxide C has oxygen to nitrogen mass ratio 0.57 : 1. The fact that there are three mass ratios might seem to contradict the Law of Definite Proportions, which on the surface seems to say that there should be just one ratio. However, each mass combination gives rise to a completely unique chemical compound with very different chemical properties. For example, oxide A is very toxic, whereas oxide C is used as an anesthesia. It is also true that the mass ratio is not arbitrary or continuously variable: we cannot pick just any combination of masses in combining oxygen and nitrogen, rather we must obey one of only three. So there is no contradiction: we simply need to be careful with the Law of Definite Proportions to say that each unique compound has a definite mass ratio of combining elements. These new mass ratio numbers are highly suggestive in the following way. Notice that, in each case, we took the ratio of oxygen mass to a nitrogen mass of 1, and that the resultant ratios have a very simple relationship: 2.28:1.14:0.57 = 2:1:0.5 = 4:2:1

The masses of oxygen appearing in these compounds are in simple whole number ratios when we take a fixed amount of nitrogen. The appearance of these simple whole numbers is very significant. These integers imply that the compounds contain a multiple of a fixed unit of mass of oxygen. The simplest explanation for this fixed unit of mass is that oxygen is particulate. We call the fixed unit of mass an atom. We now assume that the compounds have been formed from combinations of atoms with fixed masses, and that different compounds have differing numbers of atoms. The mass ratios make it clear that oxide B contains twice as many oxygen atoms (per nitrogen atom) as does oxide C and half as many oxygen atoms (per nitrogen atom) as does oxide A. The simple mass ratios must be the result of the simple ratios in which atoms combine into molecules. If, for example, oxide C has the molecular formula NO, then oxide B has the formula NO2, and oxide A has the formula NO4. There are other possibilities: if oxide B has molecular formula NO, then oxide A has formula NO2, and oxide C has formula N2O. Or if oxide A has formula NO, then oxide B has formula N2O and oxide C has formula N4O. These three possibilities are listed in Table 2. Possible Molecular Formulae for Nitrogen Oxides Assuming that: Oxide C is NO Oxide B is NO Oxide A is NO Oxide A is NO4 NO2 NO Oxide B is NO2 NO N2O Oxide C is NO N2O N4O We don't have a way (from these data) to know which of these sets of molecular formulae are right. But we can assert that either one of them or one analogous to them is right. Similar data are found for any set of compounds formed from common elements. For example, there are two oxides of carbon, one with oxygen to carbon mass ratio 1.33:1 and the other with mass ratio 2.66:1. The second oxide must have twice as many oxygen atoms, per carbon atom, as does the first. The general statement of this observation is the Law of Multiple Proportions.

[edit] Law 3: Law of Multiple Proportions

When two elements combine to form more than one compound, the mass of element A which combines in the first compound with a given amount of element B has a simple whole number ratio with the mass of element A which combines in the second compound with the same given mass of element B. This sounds confusing, but an example clarifies this statement. Consider the carbon oxides, and let carbon be element B and oxygen be element A. Take a fixed given mass of carbon (element B), say 1 gram. The mass of oxygen which combines with 1 gram of carbon to form the first oxide is 1.33 grams. The mass of oxygen which combines with 1 gram of carbon to form the second oxide is 2.66. These masses are in ratio 2.66:1.33=2:1, a simple whole number ratio. In explaining our observations of the Law of Multiple Proportions for the carbon oxides and the nitrogen oxides, we have concluded that the simple mass ratio arises from the simple ratio of atoms contained in the individual molecules. Thus, we have established the following postulates of the Atomic Molecular Theory. What does this mean!!

[edit] Theory 1: Atomic Molecular Theory

· the elements are composed of identical atoms · all atoms of a single element have the same characteristic mass · these number and masses of these atoms do not change during a chemical transformation · compounds consist of identical molecules formed of atoms combined in simple whole number ratios

In a very summarized way, the law of multiple proportions states: "when 2 elements form more than 1 compound, the different masses of 1 element that are combined with the same mass of the other element are in a ratio of small whole numbers".